Design standard for anti shattering of photo frame glass

2025-06-04 16:32:35

The anti shatter design standards for photo frame glass mainly include the following points:

Material selection

Priority should be given to using tempered glass or laminated glass, which has an impact strength 3-5 times that of ordinary glass. After shattering, it forms obtuse angle particles to reduce the risk of injury;

The recommended thickness is ≥ 3mm, and for large photo frames, it should be increased to 5-8mm to improve stability.

Process requirements

Tempered glass needs to pass 3C certification to ensure that the heat treatment process meets the standards and eliminate internal stress unevenness issues;

The edges need to be finely polished to avoid stress concentration caused by cutting defects.

Protective measures

Apply explosion-proof film (thickness ≥ 0.3mm) on the surface to prevent fragments from splashing;

The frame design reserves 1-2mm expansion joints to avoid thermal expansion and contraction squeezing the glass.

Installation and maintenance

Use elastic rubber pads to fix the glass and reduce hard contact;

Regularly inspect the edges and corners for cracks to avoid sharp object impacts.

Through material optimization and structural design, safety and aesthetics can be balanced.

Longbo picture frame glass

Type: Float Glass, Sheet Glass,Anti Glare Glass,Anti reflective glass

Thickness: 1.5mm, 1.8mm, 2mm, 2.5mm,2.8mm, 3mm etc.

Size: 1830x2440mm,1830x1220mm,914x1220mm, 914x610mm etc.

More product details:https://longboglass.com/product/2.html